AEROCUTT.COM
Honda Civic EG Custom Full Flat Front Panel Set
Honda Civic EG Custom Full Flat Front Panel Set
Couldn't load pickup availability
Honda Civic EG B-Series Three-Piece Full Front Undertray
We originally built this three-piece undertray for one customer’s EG Civic running a B18C2 engine and S80 transmission. When we shared photos of the finished car, other EG owners asked about the setup. We’ve listed it here to show what’s possible with a full front flat floor and to give owners with a closely matching build the option to run one. Considering our range of 3D scan data, this theoretically also fits a D16 car.
For almost all EG Civics, we recommend our Standard or Compact Honda skid plate, rather than this product. Both are easier to fit and more practical for regular use.
Full front coverage
The undertray bolts to the front bar and extends back to the front sway bar, forming an almost flat floor beneath the engine and gearbox. Four formed louvres in the centre panel allow airflow through the tray to aid cooling. The two side wings extend coverage to the front corners and help stiffen the lower edge of the front bar. and complete the front end coverage.
The complete three-piece assembly comes in 3 mm aluminium only, with no add-ons.
Check your setup before ordering
Compare the fitted photos carefully with the underside of your car. Check the front bar mounting points, the clearance around the front sway bar and the route your exhaust takes. In the close-up photos, the exhaust flexi section is visible through the rectangular cutout near the rear edge of the centre panel. This is a common flexi location, but its position varies between exhaust systems. This product was designed to clear aftermarket tubular headers. Please consider that although this is a common EG civic setup, this product was custom made for one specific car, so modification may be required to make this fit to your vehicle.
If your front bar mounting points, exhaust routing or flexi position differ from the car shown, modifications will be required.
Servicing
The centre panel has no service access holes. You’ll need to remove the undertray for oil changes and any other maintenance that requires access from underneath. Slotted fastener holes still make this a relatively smooth process.
